If you have any additional questions regarding your product, contact us at email@example.com
Frequently asked questions
Can I run beverages other than coffee through my Nitro Infuser?
Absolutely. You can run any still beverage through the infuser. See some of our suggestions here.
Am I able to wholesale the Nitro Infuser?
What is the ideal draft system for Nitro Infuser installation?
The Nitro Infuser is compatible with any draft system. If you are using Cornelius Kegs (Corny Kegs), we recommend installing a Ball Lock Disconnect with Check Valve (Gas) to prevent backflow of beverage, as this will hinder performance of your Nitro Infuser.
In every system, draft lines, stout faucets, and connectors should be cleaned regularly.
What PSI and temperature should I use with the Nitro Infuser?
We recommend setting your nitrogen regulator between 28-32 PSI as a starting point, however adjust as needed. We also recommend setting your kegerator at 36 degrees F as a starting point, adjust as needed. Please note, all machines are different so adjust these settings as you see fit.
Should I still pre-charge my kegs?
No. You should not pre-charge your kegs when using a Nitro Infuser. The Nitro Infuser infuses the beverage on-demand instantly, eliminating that step.
Do I still need a tank of nitrogen gas?
Yes. You will need either a tank of nitrogen gas or a nitrogen generator. Please note - states require food-grade nitrogen when infusing into beverages.