Am I able to wholesale the Nitro Infuser?
To get more information on wholesaling the Nitro Infuser, you can contact Brandon Martin at firstname.lastname@example.org, or by calling +1 952.232.5900. If you are ready to get started wholesaling, you can fill out the Nitro Dealer application here.
Can I run beverages other than coffee through my Nitro Infuser?
Absolutely. You can run any still beverage through the infuser. See some of our suggestions here.
Can my Nitro Infuser get clogged from any suspending solids? (House-made syrups, matcha, etc.)
Anything that can run through a stout faucet can run through the Nitro Infuser. If you’re unfamiliar with the size, simply unscrew the spout from your stout faucet and view the 5 holes inside. Additionally, there are no internal moving parts so your infuser will simultaneously get cleaned when you clean your lines..
What PSI and temperature should I use with the Nitro Infuser?
We recommend setting your nitrogen regulator between 28-32 PSI as a starting point, however adjust as needed. We also recommend setting your kegerator at 36 degrees F as a starting point, adjust as needed. Please note, all machines are different so adjust these settings as you see fit.
Should I still pre-charge my kegs?
No. You should not pre-charge your kegs when using a Nitro Infuser. The Nitro Infuser infuses the beverage on-demand instantly, eliminating that step.
Do I still need a tank of nitrogen gas?
Yes - you will need either a tank of nitrogen gas or a nitrogen generator. Please note - states require food-grade nitrogen when infusing into beverages.